MONTREAL, Canada — Since 2010, Montreal’s Rialto Theatre has undergone extensive
renovations to bring the historic venue back to its former glory. Originally built
in 1923 and designated a National Historic Site of Canada in 1993, the venue has
undergone several changes throughout its lifetime from its original use as a cinema
to a high-end steakhouse in 2000 to the live entertainment space it now offers.
After its 2010 purchase by current owners/operators Ezio Carosielli and Luisa
Sassano, the venue has revitalized both the interior space and the iconic
architectural elements of its façade, including a new exterior lighting system
outfitted with HARMAN’s Martin Professional architectural lighting solutions.

When structural renovations in the summer of 2014 presented an opportunity to
refresh the façade, Garou Blancan, the Rialto’s Technical Director and winner of
Martin Professional’s 2014 Young Lighting Designer Contest, designed a solution
consisting of 46 Martin Exterior and Tripix fixtures. “I wanted to make the design
as simple and efficient as possible,” noted Blancan. “I’ve worked with Martin
fixtures for over four years. The effort they put into research and development
truly translates to their products.”

The façade features many fine architectural details that Blancan wanted to
highlight, so he broke his design into five zones, with each zone focusing on a
different element of the façade. Zone 1 has four Martin Tripix 1200 IP66-rated LED
strips to light the Rialto Theatre Ornament above the main entrance, while Zone 2
features six Martin Exterior 50 IP68-rated fixtures to illuminate the façade roof.
Blancan installed 15 Tripix 300 LED strips in Zone 3 to highlight the circular
windows across the upper level of the façade and below in Zone 4 he used 15 Tripix
Wash fixtures in the mid-level to cover the façade’s tall windows and columns. Zone
5 illuminates the area above the Marquee with three Exterior 410 fixtures per side.

“The owners wanted to stay more reserved with lots of white and softer colors,” said
Blancan. “Martin’s LED white is incomparable and with the Tripix series we were able
to mix color directly at the lens to avoid shadows.”

Blancan was also required by the ownership to hide the fixtures from street views,
which also meant housing the power supplies and control inside the theatre. As a
national landmark and designated historic site, the ownership needed special
permission to drill holes through the façade surface to lead power and control
cabling from the fixtures to the control and power supply units inside. With cold
temperatures reaching negative degrees Fahrenheit during Canadian winters, it was
important for not only the fixtures to withstand the cold but also for the cable
holes to be properly sealed from moisture to protect the façade from cracking.

“Throughout this past winter we had temperatures as low as -40 degrees and the
Martin fixtures withstood the cold without issue,” said Blancan. “To prevent
cracking around the holes in the façade surface I used marine epoxy to create a
waterproof seal around the cables.”

To control the exterior lighting design, Blancan deployed Martin’s M-PC software
with USB-DMX interfaces. According to Blancan, he chose M-PC due to its RDM
compatibility and to maintain consistency with the other Martin components in the
design.

“I am a huge supporter of Martin controllers,” said Blancan, noting that he recently
won Martin’s M2GO portable console as his prize for the 2014 YLD contest and uses an
M1 console at the Rialto as well. “The M-PC software is very architecturally
friendly; you can easily pre-program shows and it’s the same software as Martin’s
other M-Series consoles.”

Learn more about Garou Blancan’s work in the lighting industry by visiting Martin
Professional’s Wall of Dedication: http://wall.martin.com/?open=73

For more information on the Rialto Theatre, please visit:
www.theatrerialto.ca

For more information on Martin architectural lighting solutions, please visit:
www.martin.com